ARW 10x6/2 HS Stainless Steel
       Article
 
ARW 10x6/2 HS Stainless Steel Clearing Trolley 3-sided upstand 2 shelves 1000x600
Article-code:
0139292
 
Number of shelves:
2
 
Shelf dimensions in mm:
1000 x 600 mm
 
Load per unit area / shelf:
60 kg
 
Working height between shelves in mm:
372 mm
 
Height of top shelf in mm:
700 mm
 
Chassis:
4 swivel castors, 2 of them with brake, Ø 125 mm
 
Total load capacity:
120 kg
 
Net weight:
25 kg
 
External dimensions W x D x H in mm:
1095 x 695 x 1023 mm
 
 
 
The trolleys are manufactured from high-quality stainless 
steel.
Rugged construction made from two tubular steel bar push 
handles, Ø 25 mm, with welded deep drawn shelves with 
elevated perimete        mehr » 
            
The trolleys are manufactured from high-quality stainless 
steel.
Rugged construction made from two tubular steel bar push 
handles, Ø 25 mm, with welded deep drawn shelves with 
elevated perimeter flange in-between. 

Reinforced chassis with 2 transversely welded-in stainless
Steel profiles as cross bar. The ARW HS can be driven over 
uneven floors, eg. Thresholds, without any problems, even 
with maximum loading. 

Deposit surfaces with large radii for easy cleaning, lowered 
by approx. 10 mm in contrary to the perimeter flange. 
Shelves are bevelled by 35 mm all over, with flat safety 
return to the insidesound absorbing lining. 
In addition the trolley is equipped with a reinforcing bar 
underneath the top shelf consisting of one brace each at 
both longitudinal sidesone diagonal brace. 
Therefore this shelf can be charged with a permanent load per 
unit area up to 60 kg. 

The top shelf is bordered on three sides both front sides 
and one longitudinal side by an upstand. The upper edge is 
90 mm above the splash edge and 100 mm above the shelf-
surface. This ensures that nearly the complete shelf area can 
be used for the deposit of various articlessmall
lightweight pieces are effectively protected from falling off 
when being moved on uneven surfaces even with maximum 
load. The skirting consists of stable 1.5 mm strong stainless 
steel platesis stationary connected with the splash 
edge. 

The clearing trolley is protected against damage by four 
disc bumpers with are fixed directly above the castors. Disc 
bumpers are made from elasticshock resistant plastic 
material. If necessary they can be exchanged easily by 
releasing the castors. 

Corrosion-protectedmaintenance-free castors. 
Housings made from zinc-chrome plated steel, solid castor 
made from impact-proofed, acid-grease-proofed 
plastic, tyres from thermoplastic rubber. High-grade 
bearings by slide-bearings. 
4 swivel castors, Ø 125 mm, 2 of them with brake. 
If necessary, castors can be exchanged easily, plate fixing. 
        «schliessen
             
ARW 10x6/2 HS Stainless Steel

ARW 10x6/2 HS Stainless Steel
Image examples,technical changes reserved, without decoration.
 
 
Specsheet
 
 
 
Leaflet, pdf (5,63 MB)
 
 
 
Specification sheet, pdf (0,00 MB)
 
 




 
All information / dimensions are approximate, technical changes reserved. © 2014 - HUPFER® Metallwerke GmbH & Co. KG www.HUPFER.de -
General conditions
- Conditions of purchase - Masthead